首页
草莓?
影响力0.00
经验值0.00
粉丝13
销售
水溶液尿素间断出现黄尿素的原因? 你们在高压系统波动时对合成装置的co2脱碳工段排查了吗?你们两套尿素有脱硫装置吗?如果有可以查查脱硫剂的问题。查看更多
来自话题:
向高手请教? 要做什么东西? 异戊烯醇?苯丙醇?烯基甲醇?查看更多
来自话题:
腐蚀裕量的选取? 请教朋友,设计使用寿命为20年,设计压力1.83mpa,设计温度120℃,介质为环己烷/酮/酮、碱水液,壳体材质分别q345r和s30408的腐蚀裕量分别是多少?查看更多
start up procedure 翻译? 请教start up procedure如何翻译更好? 我觉得开车程序更好。我们的标准用法都是这样用的。查看更多
来自话题:
催化裂化 吸收稳定操作的几个疑问? 回复 8# 朴素无华 这个主要是塔顶气量突然增大 正常情况下塔压1.14mpa的时候气量就10000左右 气阻时塔压1.19mpa 气量就升到14000了 然后凝缩油液面猛涨 解吸塔进料阀大开也不能即使放掉液面 而且会影响解吸塔液面、塔底温度 对后面整个操作都影响很大 有时不知道为什么气量突然就增大了?很莫名奇妙查看更多
关于升任 yizhuxuan为多晶硅版块第一负责人的声明? 其实我是为红包而来查看更多
来自话题:
氨吸收塔管道堵塞? 可能是有机胺类物质,脱水后就形成晶体的,楼主可以查下乙醇胺或者甲胺之类的物质。 结冰的可能性不大,液氨中不含有水啊。查看更多
来自话题:
常温操作的柴油(闪点55℃)泵的电机不防爆可以吗? 用吧,又花不了几个钱,求个安心。查看更多
鼓风炉的风口堵了,有什么好的桶打装置吗? 话说我们这还是矩形炉查看更多
物性方法选择? 做一个塔,含有如下的物质:甲醇、甲酸甲酯、丙酮、甲基乙基酮、二乙基酮、醋酸、丙酸、乙醛、乙醇、醋酸甲酯、乙酸乙酯、水、甲酸应该选择什么模型。 选了prws,还试了很多其他常用的物性方法,都是有相同的警告提示,不知道是不是因为物性方法的问题 ,如果不是请指教,是的话请推荐一个合适的方法,谢谢: processing input specifications ... * warning in the "properties" paragraph which begins on line 65 free-water method should be steamnbs when the main property method is srk. default free-water method is steam-ta please specify the recommended free-water method and run again. information binary parameters prkij (data set 1) for model esprstd are retrieved from sdf table. table name = esprstd * warning in the "stream" paragraph which begins on line 268 stream name: feed component mass fractions are normalized to unity. * warning in the "stream" paragraph which begins on line 276 stream name: steam component mole flows of substream: "mixed" are normalized to the total mole flow value. * warning in physical property system equation of state model polysl has missing parameters: slpstr (data set 1) missing for component methanol a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component methanol a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component methanol a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component methy-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component methy-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component methy-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component aceto-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component aceto-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component aceto-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component methy-02 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component methy-02 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component methy-02 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component dieth-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component dieth-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component dieth-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component aceti-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component aceti-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component aceti-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component propi-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component propi-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component propi-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component aceta-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component aceta-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component aceta-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component ethan-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component ethan-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component ethan-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component methy-03 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component methy-03 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component methy-03 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component ethyl-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component ethyl-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component ethyl-01 a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component water a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component water a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component water a nominal value of 736. (kg/cum) assumed * warning in physical property system slpstr (data set 1) missing for component formi-01 a nominal value of 3000. (bar) assumed * warning in physical property system sltstr (data set 1) missing for component formi-01 a nominal value of 415. (k) assumed * warning in physical property system slrstr (data set 1) missing for component formi-01 a nominal value of 736. (kg/cum) assumed查看更多
来自话题:
继续解决循环水浓缩倍数的问题!!!!!!!!!!!1? 1,保有水量4万是不是多了点,一般在1万就差不多了,够循环水泵抽10分钟。 2,以浓缩8倍计算,要蒸发28万吨水,所花的时间和设计温度有关系,一般以10度温差计算,蒸发/漂水大概每小时在1.7%左右,每小时补水大概在1020吨,蒸发掉28万吨水大概需要275小时。这个基础上再考虑到排污的补水,进行修正。查看更多
氧泵轴承联锁? 回复 4# rengaosd 出口温度是要设置联锁的,防止氧气管网温度过低,导致氧管线、氧阀门燃爆事故的发生!这是欧洲气体行业标准中提到的,并且根据国内多家企业的实践,我们发现其设置是合理和安全的!查看更多
来自话题:
锅炉汽包液位 正负导压管 疑惑? 俺认为也是有迁移了!查看更多
来自话题:
强度校核前壁厚的计算? 计算前,可以按均匀壁厚,如果有问题,可以选择分段设计。查看更多
季铵盐提纯? 季铵盐本来就不适合爬板子啊提纯方法要根据你的反应体系来选择的,目前给出的信息太少查看更多
来自话题:
片碱在包装前段,温度较高。如何降温? 用北风吹,最好是西北风查看更多
来自话题:
沉降槽至灰水槽连通管? 再跟踪一下:絮凝剂、分散剂分别用那家的?型号和用量如何? 分散剂絮凝剂用的那个江阴的贝克吉利尼,絮凝剂3-5ppm,分散剂60-80ppm,效果挺好的,就是这个药剂挺贵的 查看更多
来自话题:
催化重整注硫目的? 重整新催化剂开工时还有一个类似于预加氢部分的预硫化,主要目的是为了抑制重整双金属催化剂开工初期活性,避免超温。预硫化的基本原理是用硫使催化剂初期暂时中毒,避免剧烈反应引起的超温,预硫化时,一小部分硫为催化剂吸附成为不可逆吸附状态,而大部分硫呈可逆吸附硫,进油后可逐渐解脱。硫化量取决于催化剂的金属含量,大约为0.1%左右为宜。查看更多
求助 HG-T 20639.1-1998 自控专业工程设计用典型表格? 本论坛就有 hg/t 20639.1-1998 自控专业工程设计用典型表格 https:///viewthread. ... 4%d0%cd%b1%ed%b8%f1 查看更多
帮忙计算一下,变换出口流速? 这个计算自己算算就行,套公式。主要需要注意的是24寸是工程直径,内径要修正一下。 按公式谁算出来都一样查看更多
简介
职业:上虞京新药业有限公司 - 销售
学校:荆州职业技术学院 - 化工学院
地区:河南省
个人简介:秩序,只有秩序才能产生自由。查看更多
已连续签到天,累积获取个能量值
  • 第1天
  • 第2天
  • 第3天
  • 第4天
  • 第5天
  • 第6天
  • 第7天
 
这是一条消息提示
 
提醒
您好,您当前被封禁天,这天内您将不能登陆盖德问答,离解封时间还有
我已了解
提醒
提问需要5个能量值,您当前能量值为,请完成任务提升能量值
去查看任务