首页
清欢渡不归路
影响力0.00
经验值0.00
粉丝13
销售
一篇英语文献及其翻译希望对大家有帮助? Natural gas and chemical industry One of the branches of the chemical industry. To natural gas as raw materials to produce chemical products industries. Separation and purification of natural gas through the cracking, steam reforming, oxidation, chloride, Sulfide, nitrification, and so on dehydrogenation reaction can be made of synthetic ammonia, methanol and their processed products (formaldehyde, acetic acid, etc.), ethylene, acetylene, methylene chloride, Carbon tetrachloride, carbon disulfide, nitromethane, and so on. Natural gas and chemical industry - natural gas to natural gas and chemical industry as raw materials to produce chemical products industry, chemical industry is an integral part of the fuel. As the oil and natural gas are both buried in the ground floor of hydrocarbon resources, and in some cases for the symbiotic mineral deposits, processing technology and its products are closely related to each other, it can also be attributed to natural gas and chemical industry Petrochemical. Natural gas and chemical industry in general, including the separation of natural gas purification, chemical processing (contained methane, ethane, propane, and other processing and utilization of alkanes). Natural gas and chemical industry - natural gas processing Can be divided into separation and purification of chemical processing. Purification, including separation from the underground natural gas in the gas field, dehydration, separation from sand and condensate oil, gas composition based on further clean separation processing. Sulfide-rich gas, desulfurization must be dealt with in order to meet delivery requirements of the by-product of sulfur as sulfur resources to the production of sulfuric acid, carbon disulfide and a series of sulfide; desulfurization, after a cryogenic gas separation (see cryogenic gas separation ), Available liquefied natural gas (see methane); if the gas-rich rare gas helium, helium can be obtained at the same time (see color pictures); if natural gas is rich in ethane paraffin over the moisture can be obtained at the same time natural gas condensate Analysis of fluid, which Rectification of the methods often used to recover ethane, propane, butane, and also part of the condensate. Chemical processing Including high temperature for the pyrolysis of natural gas to produce carbon black and acetylene; steam reforming of natural gas or partial oxidation of natural gas, synthetic gas can be obtained; natural gas through chlorination, sulfide, nitrification, ammoniated oxide, oxidation can be obtained A N all kinds of derivatives; in the wet gas ethane, propane, butane and natural gas liquid condensate, and so on, the steam cracker or pyrolysis to produce ethylene, propylene and butadiene; dehydrogenation of butane oxidation or produce small Diene or acetic acid, methyl ethyl ketone, and maleic anhydride, and so on (see Figure). Natural gas and chemical industry - the world's natural gas and chemical industry in the world, about 50 countries in varying degrees of development of natural gas and chemical industry. Distribution of natural gas chemical industry in more developed countries are the United States, the Soviet Union, and Canada. U.S. development of the first natural gas chemical industry, product variety and still top the current production. Consumption of natural gas in the chemical industry, accounting for the chemical industry raw materials and fuel consumption by more than half of the total. The mid-1970s the Soviet Union to adjust the chemical industry, chemical industry to speed up the development of natural gas production. Siberian natural gas producing areas in the production of new devices, used in large-scale synthetic ammonia, ethylene and methanol, carbon disulfide. At present, its chemical products and natural gas production after the United States. Canada is rich in natural resources, for ammonia, urea, methanol and ethylene production. The main direction of the product in 1980 of the world's major countries, chemical products and natural gas production more than 150Mt. With an annual output of more than 10Mt of the products of synthetic ammonia, urea, methanol, formaldehyde and ethylene. In the world of synthetic ammonia production, about 80% of natural gas as raw materials. World ammonia plant construction was the focus from Europe and the United States and other countries to rich natural gas resources in the region. Naphtha as fuel or raw materials to the ammonia plant will be natural gas or coal as raw material transition (See industrial ammonia). Methanol for the bulk of the world organic chemical products one of the world production of methanol in 70% of natural gas as raw materials. In addition to the direction of the application of methanol to maintain traditional uses, is developing alternative energy sources and uses of chemical products. Natural gas as raw materials of ethylene production capacity of ethylene production capacity of the world accounting for about 32% of its ethylene yield than light oil distillates such as naphtha as raw materials, about twice as high. With the increase in the production of natural gas and ethane, propane recovery rate of increase in the proportion of which are increasing. Natural gas and chemical industry - natural gas chemical industry in China started in the early 1960s, has now begun to take shape, mainly distributed in Sichuan, Heilongjiang, Liaoning, Shandong, Taiwan Province and other places. China mainly natural gas used in the production of nitrogen, followed by the production of methanol, formaldehyde, acetylene, methylene chloride, carbon tetrachloride, carbon disulfide, nitromethane, hydrocyanic acid and extraction of helium and carbon black. Since the 70s, has built more than natural gas and oil field associated gas as raw materials for large-scale ammonia plant, as well as a number of small and medium-sized ammonia plant, so that the national structure of the synthetic ammonia production of raw materials, natural gas share of about 30%; also be built at the same time A system of acetylene gas plant to manufacture Vinylon and vinyl acetate, acetylene gas used in the production of methanol. Use of natural gas for heat chlorination methylene chloride for the production of photographic materials for industrial solvent. At present, China's first natural gas processing chemical products output is about 70 times in the early 14's. Natural gas and chemical industry - with the prospect of the world's energy needs increase, the North Sea, the Middle East, North Africa, South America and the Soviet Union's gas and oil associated gas resources is speeding up development and utilization of the steady growth of world output of natural gas, natural gas and chemical industry to flourish and to provide sufficient raw materials Energy. Under such conditions, the development of natural gas and chemical industry has the following characteristics: From the start of the bulk of natural gas chemical products, such as nitrogen, methanol and their processed products (formaldehyde, acetic acid, etc.) with fast development; In the olefin production in the United States expanded the use of raw materials and natural gas, the Middle East and South American countries plan to develop natural gas to olefins industry, thereby enhancing the olefin production of natural gas in the world the proportion of raw materials; To energy-focused research and development work in very active; The new technology has emerged, particularly synthesis gas of carbon-based chemicals a more prominent. 天然气化工 化学工业分支之一。以天然气为原料生产化工产品的工业。天然气通过净化分离和裂解、蒸汽转化、氧化、氯化、硫化、硝化、脱氢等反应可制成合成氨、甲醇及其加工产品 ( 甲醛、醋酸等 ) 、乙烯、乙炔、二氯甲烷、四氯化碳、二硫化碳、硝基甲烷等。 天然气化工 - 天然气化工以天然气为原料生产化学产品的工业,是燃料化工的组成部分。由于天然气与石油同属埋藏地下的烃类资源,有时且为共生矿藏,其加工工艺及产品相互有密切的关系,故也可将天然气化工归属于 石油化工 。天然气化工一般包括天然气的净化分离、化学加工(所含甲烷、乙烷、丙烷等烷烃的加工利用)。 天然气化工 - 天然气加工过程 可分为净化分离和化学加工。 净化分离 包括从地下采出的天然气,在气井现场,经脱水、脱砂与分离凝析油后,根据气体组成情况进行进一步的净化分离加工。富含硫化物的天然气,必须经过脱硫处理,以达到输送要求,副产品的硫磺作为硫资源,用以生产硫酸、二硫化碳等一系列硫化物;脱硫后,天然气经过深冷分离(见天然气深冷分离),可得到液化天然气(见甲烷);若天然气富含稀有气体氦,可同时得到氦气(见彩图);若天然气是富含乙烷以上烷烃的湿气 , 则可同时得到天然气凝析液 , 后者常采用精馏的方法,以回收乙烷、丙烷、丁烷,并且还有一部分凝析油。 化学加工 包括在高温下进行的天然气热裂解,主要生产乙炔和炭黑;天然气蒸汽转化或天然气的部分氧化,可制得合成气;天然气经过氯化、硫化、硝化、氨化氧化、氧化可制得甲烷的各种衍生物;湿性天然气中的乙烷、丙烷、丁烷和天然气凝析液等,经蒸汽裂解或热裂解可生产乙烯、丙烯和丁二烯;丁烷脱氢或氧化可生产丁二烯或醋酸、 甲基乙基酮 、 顺丁烯二酸酐 等(见图)。 天然气化工 - 世界天然气化工世界上约有 50 个国家不同程度地发展了天然气化工。 分布状况 天然气化工比较发达的国家有美国、苏联、加拿大等。美国发展天然气化工最早,产品品种和产量目前仍居首位。消耗于化学工业的天然气,占该国化工行业所消耗原料和燃料总量的一半以上。 20 世纪 70 年代中期苏联调整了化学工业政策,加速发展天然气化工生产。在西伯利亚天然气产区新建生产装置,大规模应用于合成氨、甲醇和乙烯、二硫化碳。目前,其天然气化工产品产量仅次于美国。加拿大有丰富的天然气资源,用于合成氨、尿素、甲醇和乙烯的生产。 主要产品方向 1980 年世界主要国家的天然气化工产品产量超过 150Mt 。年产 10Mt 以上的产品有合成氨、尿素、甲醇、甲醛和乙烯。 在世界合成氨产量中,约 80 %以天然气为原料。世界氨厂建设重点正由过去欧美等国转向天然气资源丰富地区。石脑油或燃料油为原料的氨厂将逐步向天然气或煤为原料过渡(见合成氨工业)。 甲醇为世界大宗有机化工产品之一,世界甲醇生产中 70 %以天然气为原料。甲醇应用方向除保持传统用途外,正在开发替代能源和化工新产品的用途。 天然气为原料的乙烯装置生产能力约占世界乙烯生产能力的 32 %,其乙烯收率比以石脑油等轻质石油馏分为原料的约高一倍。随着天然气产量的增加和乙烷、丙烷回收率的提高,所占比例正在逐步增加。 天然气化工 - 中国天然气化工始于 20 世纪 60 年代初,现已初具规模,主要分布于四川、黑龙江、辽宁、山东、台湾省等地。中国天然气主要用于生产氮肥,其次是生产甲醇、甲醛、乙炔、二氯甲烷、四氯化碳、二硫化碳、硝基甲烷、氢氰酸和炭黑以及提取氦气。 70 年代以来,已兴建多座天然气和油田伴生气为原料的大型合成氨厂,以及一批中、小型合成氨厂,使全国合成氨生产原料结构中,天然气所占的比例约达到 30 %;同时还兴建了天然气制乙炔工厂,以制造维尼纶和醋酸乙烯酯,乙炔尾气用于生产甲醇。采用天然气热氯化法生产二氯甲烷以供感光材料工业作溶剂。目前,中国的天然气一次化学加工产品总产量约为 70 年代初期的 14 倍。 天然气化工 - 前景随着世界对能源需要的增长,北海、中东、北非、南美和苏联的天然气和石油伴生气资源正在加速开发利用,世界天然气产量稳定增长,为天然气化工蓬勃发展提供充足的原料和能源。在这种条件下,天然气化工的发展具有下述特点: 从天然气出发的大宗化工产品,如氮肥、甲醇及其加工产品(甲醛、醋酸等)发展速度较快; 在烯烃的生产中,美国扩大了天然气原料的使用量,中东和南美国家将计划大力发展天然气制烯烃工业,从而提高世界烯烃生产中天然气原料所占比例; 以节能为中心的研究开发工作十分活跃; 新工艺相继出现,特别是以合成气为基础的碳一化学更为突出。 查看更多 2个回答 . 5人已关注
想建一套氯碱装置,规模多少最经济呀? 想建一套氯碱装置,规模多少最经济呀 , , - 查看更多 1个回答 . 3人已关注
发布很早以前收集的一些CAD绘图经验资料? 文件比较多,,都是一些小东西。。查看更多 12个回答 . 3人已关注
求颗粒物喷射类的Fluent例子? 由于要开展的课题是 柴油机 尾气脱硝的,需要 尿素 喷射的模拟,求有关尿素喷射的例子 查看更多 1个回答 . 4人已关注
同煤集团硫化氢浓缩塔吊装**成功? 11月8日,中国化学工程集团二公司承建的同煤集团年产60万吨 甲醇 项目甲醇装置中第二大塔类设备——硫化氢浓缩塔顺利整体吊装成功礼。 同煤集团年产60万吨甲醇项目是国内单台套规模最大的甲醇项目之一,单台套设计产能66万吨。二公司主要承建其甲醇、罐区和外管装置,合同金额累计1亿元以上。硫化氢浓缩塔是甲醇装置中的第二大塔,高64米,重150吨,主吊采用650吨履带吊,240吨汽车吊溜尾,一举吊装成功。 查看更多 0个回答 . 5人已关注
二氯二氢硅在还原炉内的作用? 我们厂进还原炉的 混合气 中含有一定的 二氯二氢硅 ,由于其反应温度比较低,在尾气和混合气换热的 换热器 内就会发生反应,造成换热器堵塞,很难处理,(我们的换热器是自己改装的,效率还可以,进气温度可以提高到300-400度左右)请问一下同行,遇到这种情况你们一般如何处理?查看更多 2个回答 . 4人已关注
关于横河cs3000组态问题? 启动一个 电磁阀 ,在组态里用了一个SIO-21,有两个状态信号跟踪点,为什么这样做?用一个状态信号点不可以吗?一个状态也能反映出开和关查看更多 6个回答 . 1人已关注
柴油流量计报价?   LWGY系列 涡轮流量传感器 (以下简称传感器)基于力矩平衡原理,属于速度式 流量仪表 。传感器具有结构简单、轻巧、精度高、复现性好、反应灵敏,安装维护使用方便等特点,广泛用于石油、化工、冶金、供水、造纸等行业,是流量计量和节能的理想仪表。   传感器与显示仪表配套使用,适用于测量封闭管道中与 不锈钢 1Cr18Ni9Ti、2Cr13及刚玉Al2O3、硬质合金不起腐蚀作用,且无纤维、颗粒等杂质的液体。若与具有特殊功能的显示仪表配套,还可以进行定量控制、超量报警等。选用本产品的防爆型式(ExmIIT6),可在有爆炸危险的环境中使用。   传感器适用于在工作温度下粘度小于5×10-6m2/s的介质,对于粘度大于5×10-6m2/s的液体,要对传感器进行实液标定后使用。   (1) 结构特征   传感器为硬质合金轴承止推式,不仅保证精度,耐磨性能提高,而且具有结构简单、牢固以及拆装方便等特点。   (2)工作原理   流体流经传感器壳体,由于叶轮的叶片与流向有一定的角度,流体的冲力使叶片具有转动力矩,克服摩擦力矩和流体阻力之后叶片旋转,在力矩平衡后转速稳定,在一定的条件下,转速与流速成正比,由于叶片有导磁性,它处于信号检测器(由永久磁钢和线圈组成)的磁场中,旋转的叶片切割磁力线,周期性的改变着线圈的磁通量,从而使线圈两端感应出电脉冲信号,此信号经过放大器的放大整形,形成有一定幅度的连续的矩形脉冲波,可远传至显示仪表,显示出流体的瞬时流量或总量。在一定的流量范围内,脉冲频率f与流经传感器的流体的瞬时流量Q成正比,流量方程为:   式中:   f——脉冲频率[Hz]   k——传感器的仪表系数[1/m3],由校验单给出。若以[1/L]为单位   Q——流体的瞬时流量(工作状态下)[m3/h]   3600——换算系数   每台传感器的仪表系数由制造厂填写在检定证书中,k值设入配套的显示仪表中,便可显示出瞬时流量和累积总量。   本文转自: http://www.56ye.net/com/huapuyi/sell/itemid-929758.html 查看更多 0个回答 . 5人已关注
为什么要做职业病体检及职业病体检与普通体检的区别? 近几年来,大家对健康体检都比较熟悉,都认识到健康体检的重要性,但对职业病体检了解的为数不多,对于什么是职业病、为什么要进行职业病体检、职业病体检和普通的健康体检有何区别等都不太清楚;同时我们体检软件在实际医院应用时,也有不少医院属于职工医院,对职业病体检的需求也比较强烈,在此有必要对职业病体检进行一个简单的分析介绍。 首先、什么是职业病? 根据国家的职业病防治法规定,职业病是指企业、事业单位和个体经济组织的劳动者在职业活动中因接触粉尘、放射性物质和其他有毒、有害物质等因素而引起的疾病。主要包括有尘肺、职业性放射性疾病、职业中毒、物理因素所致职业病、生物因素所致职业病、职业性皮肤病、职业性眼病、职业性耳鼻喉口腔疾病、职业性肿瘤和其他职业病。职业病体检一般分为上岗前体检和上岗后的定期体检,另外在离岗时一般也需要进行职业病体检。 第二、为什么要进行职业病体检(职业健康检查)? 职业病体检是对接触职业性有害因素的职工进行有针对性的体格检查。上岗前的职业病体检的目的在于通过体检可以预先发现人们的职业禁忌症,同时也为以后的定期体检提供比较有参考价值的资料;而上岗后的定期职业体检可以早期发现职业病病人或者可疑的职业病患者,从而根据情况采取及时有效的治疗处理措施。职业病体检费用完全有公司承担,公司需建立劳动者职业健康档案管理制度,职业健康体检结果公司需如实告知员工。 第二、 职业病体检和普通健康体检有何区别或者说职业病体检有何特征? 1. 体检的项目不同。职业病体检的体检项目一般不是由个人或单位自己选择,则是由国家规定,一般流程是单位向当时的职业病体检中心申请进行职业病体检,然后由职业病体检中心根据职工的工作性质来决定该进行哪些项目体检,而普通的健康体检则是由个人或单位自己决定体检哪些项目。 2. 体检报告格式不同。职业病体检的报告格式需要体现职工的职业性质以及职业工作史、急慢性职业病史以及接触毒害物情况等,具体格式也和普通健康体检格式有所不同。并且报告最后要给出职业禁忌说明或建议。 3. 指标结果诊断标准不同。相同的检验指标诊断规则不一样,职业病要结合具体接触的毒害物来诊断,而健康体检就简单的根据指标结果进行诊断。 4. 职业病体检分岗前体检、在岗定期体检、离岗体检和应急体检四种情况,不同的阶段体检项目有所不同,而普通的健康体检是由个人或单位自己决定的。 5. 固定的体检周期。职业病体检有固定的周期规定,接触不同的毒害物的体检周期也不一样(比如接收 氨气 的职工体检周期是1年,而接触二 氧化硫 的职工的体检周期就是2年), 健康体检却没有严格的规定。 6. 不同的体检目的。职业病体检的主要目的是进行职业禁忌,即禁止从事相关职业的工作(比如有明显呼吸系统慢性疾病的人就禁止从事接触二氧化硫的工作),健康体检的主要目的是检查身体健康状况,以便及时就医治疗。 7. 职业危害申报。单位进行职业病体检后,需要定期向当地相关机构进行职业危险情况申报,而普通体检不需要进行申报。查看更多 0个回答 . 2人已关注
98%硫酸往储罐,槽车输送的问题? 本地区冬季最低温度-8°C左右,现在用DN32管道的输送管道,泵流量每小时6-8m³,在运行中会不会存在问题?查看更多 4个回答 . 4人已关注
三氯氢硅市场如何? 三氯氢硅市场如何,下游产品都有啥?查看更多 6个回答 . 4人已关注
盐酸储罐一般采用什么材质? 使用玻璃钢、 聚丙烯 、钢衬里的设备都能适应储存 盐酸 。看储存地有没有遮阳篷了,玻璃钢的和聚丙烯的日照下老化很快,我觉得还是选用钢衬里的设备好一些,安全。查看更多 24个回答 . 3人已关注
全国共有多少套催化? 请问现在全国共有多少套催化裂化,都在什么地方,多大的,谢谢查看更多 3个回答 . 3人已关注
当PV值显示为NAN时,我从哪个地方能看出它是高出还是低 ...? 当PV值显示为NAN时,我从哪个地方能看出它是高出还是低出量程?查看更多 8个回答 . 3人已关注
湿空冷冷却效果下降如何解决? 湿空冷冷却效果下降如何解决? [ ]查看更多 4个回答 . 4人已关注
请教高人,炉门弹簧吨位? 请教炉门横铁弹簧应在多少吨,上下横铁吨位是否一样大? 查看更多 2个回答 . 5人已关注
请问MTBE装置的开停工罐有何作用,为何要设计为压力罐? 必须要用 压力罐 因为MTBE在塔底自压出装, 但是在不正常操作时,一旦其中含有C4 进罐后气化,如果不是耐压罐会有危险的查看更多 3个回答 . 4人已关注
氧化锌脱硫槽压力降? 请问下,用于精脱硫的 氧化锌 脱硫槽,压降一般为多少?床层高度3m查看更多 5个回答 . 2人已关注
脱硫何时启停问题请教? 本文由 盖德化工论坛 转载自互联网 ,? x 我们公司脱硫系统以前启动都是在机组负荷达到150MW(300MW机组)时启动脱硫,可以避免浆液中毒等诸多问题,而目前集团要求机组负荷在10MW后就需启动脱硫系统,请教大家有什么好的做法?另外想问一下目前没有设置旁路的电厂是如何做的?查看更多 0个回答 . 2人已关注
lurgi甲醇合成工艺管路图、车间布置图、工厂位图,毕设 ...? lurgi 甲醇 合成工艺管路图、车间布置图、工厂位图,毕设急求查看更多 11个回答 . 1人已关注
简介
职业:浙江卫星石化股份有限公司 - 销售
学校:河南省工商行政管理广播电视大学 - 财会电算化系
地区:河南省
个人简介:一个人其实挺好 只是偶尔会觉得孤单。查看更多
已连续签到天,累积获取个能量值
  • 第1天
  • 第2天
  • 第3天
  • 第4天
  • 第5天
  • 第6天
  • 第7天
 
这是一条消息提示
 
提醒
您好,您当前被封禁天,这天内您将不能登陆盖德问答,离解封时间还有
我已了解
提醒
提问需要5个能量值,您当前能量值为,请完成任务提升能量值
去查看任务