碳钢衬胶压力容器技术要求翻译？ rubber lined material inward with return on the flanges faces. 在法兰面上带折边的内衬橡胶材料 1- dimensions are given on carbon steel. 对于碳钢已给出尺寸 2- all the angles, welds and roughness will be rounded, minimum 5mm. 所有的夹角、焊缝及粗糙表面应修圆，最小值5mm 3- the internal elements, the stainless steel parts excepted, to be rubber-lined inside and outside. 除不锈钢部分外，所有的内部元件内外均衬胶 4- verify the general fit before rubber lining. 在衬胶前经过常规装配校验 5- apply the following mention on the drawing and vessel 下列要求适用于图纸及容器 6- all nozzles will be plugged for transpotation using a wooder or pp counter-flange these counter-flanges to be bolted 在运输中所有的管口应使用木制或pp（聚丙烯）配对法兰封口并以螺栓固定 - for hydraulic test, each nozzle reinforcement will allow a screwed aperture 1/4" bsp with plug. 为便于水压试验，每个管口补强处应有一个1/4" bsp（英国标准管螺纹）的内螺纹孔并配丝堵 - all flanges will be drilled out of axis (north-south, vertical) 所有法兰应沿轴向钻孔（南北向，垂直） - internal gaskets will be cut out of the external dimensions of flanges 内部垫片将依照法兰的外形尺寸进行切边查看更多
第1天
关注盖德视界
添加小助手
