首页
君臣风流
影响力0.00
经验值0.00
粉丝17
工艺技术员
来自话题:
MDEA专家请进? 为什么是二氧化硫? 误操作,本该吸收硫化氢,加氢不彻底,穿透了。查看更多
来自话题:
硫化氢介质属性? 根据hg 20660-2000,硫化氢是中度危害,易爆介质。所以是第一组介质!3楼说的不对 不好意思,hg 20660-2000序号263,应该是易爆,第一组介质...查看更多
hysys动态模拟入门汇总? 动态的教程真的少,楼主nice查看更多
怎样做好主操? 用心总会获得成功的,支持下查看更多
北京和利时的DCS系统组态好不好学? 由于和利时的dcs的下层控制方案组态软件与上层监控组态软件不是一家公司开发,两者通讯很麻烦,下层硬点建好后,上层还要再建标签变量,不能直接调用,这一点不大好查看更多
来自话题:
关于硫回收尾气引入热电脱硫脱硝装置进行处理后排放的可 ...? 估计方案不可行。因为硫磺回收尾气中除了二氧化硫外,还有硫化氢和硫。通常情况下,脱硫脱硝只能脱除其中的二氧化硫,而不能脱除硫化氢和硫。查看更多
来自话题:
重结晶的方法? 谢谢,版兄![em01][em14]查看更多
来自话题:
求DMF无水处理? 以下是“ purification of laboratory chemicals 5th“上的: n,n-dimethylformamide (dmf) [68-12-2] m 73.1, b 40°/10mm, 61°/30mm, 88°/100mm, 153°/760mm, d 0.948, n25 1.4269, pk -0.3. decomposes slightly at its normal boiling point to give small amounts of dimethylamine and carbon monoxide. the decomposition is catalysed by acidic or basic materials, so that even at room temperature dmf is appreciably decomposed if allowed to stand for several hours with solid koh, naoh or cah2. if these reagents are used as dehydrating agents, therefore, they should not be refluxed with the dmf. use of caso4, mgso4, silica gel or linde type 4a molecular sieves is preferable, followed by distn under reduced pressure. this procedure is adequate for most laboratory purposes. larger amounts of water can be removed by azeotropic distn with *benzene (10% v/v, previously dried over cah2 , at atmospheric pressure: water and *benzene distil below 80°. the liquid remaining in the distn flask is further dried by adding mgso4 (previously ignited overnight at 300-400°) to give 25g/l. after shaking for one day, a further quantity of mgso4 is added, and the dmf distd at 15-20mm pressure through a 3-ft vacuumjacketed column packed with steel helices. however, mgso4 is an inefficient drying agent, leaving about 0.01m water in the final dmf. more efficient drying (to around 0.001-0.007m water) is achieved by standing with powdered bao, followed by decanting before distn, with alumina powder (50g/l; previously heated overnight to 500-600°), and distilling from more of the alumina; or by refluxing at 120-140° for 24h with triphenylchlorosilane (5-10g/l), then distilling at ca 5mm pressure [thomas and rochow j am chem soc 79 1843 /957]. free amine in dmf can be detected by colour reaction with l-fluoro-2,4-dinitrobenzene. it has also been purified by drying overnight over koh pellets and then distd from bao through a 10 cm vigreux column [exp cell res 100 213 7976]. [for efficiency of desiccants in drying dimethylformamide see burfield and smithers [/ org chem 43 3966 1978, and for a review on purification, tests of purity and physical properties, see juillard pure appl chem 49 885 7977]. pdf原文上copy下来的,有些字符有点乱。下载这本书请去化学软件资源版。感谢那位上传的朋友! [此贴子已经被作者于2004-7-30 14:00:34编辑过] 查看更多
谈谈你厂都有什么炼油装置? 500万吨/年常减压 120万吨/年延迟焦化 180万吨/年加氢裂化 200万吨/年柴油加氢 50万吨/年连续重整 20万吨/年芳烃抽提 6万吨/年硫磺回收 产品精制 6万标立制氢 3万标立psa查看更多
来自话题:
斜垫铁相互间的倾斜角度不大于 3°有没有依据呀? 阅读:化工机器安装工程施工及验收规范 在hgj203中只是要求倾斜角不大于3°,但是为什么不能大于这个数值,却没有解释 查看更多
来自话题:
反应器塔内件的安装? 能讲讲原因吗?谢谢 防止漏液 查看更多
有没有更简单的煤焦油-- 柴油生产工艺? 回复 1# bdcgr 加氢可以生产柴汽油技术相对来说成熟查看更多
直流屏充电电压过高报警? 回复 3# zjyssf 呵呵,知道了,我们公司电瓶用了7、8年了查看更多
S7-300PLC中文版读程序问题? 能解释一下嘛查看更多
离子膜电解槽加酸浓度的调整? https:///viewthread.php?tid=239621&highlight= 楼主可以参考此帖!查看更多
炼油厂总加工流程的优化和选择? 售价有点高吧。。。。查看更多
推荐求助《长输管道施工技术》一书? 我有这本书 是pdf的 我不能上传附件查看更多
来自话题:
PVC生产过程中冷库设计温度一般是多少? 引发剂是在一定温度下容易分解的物质,应在低温下(一15℃以下)储存,冷库中的引发剂要定期检查,以免分解造成火灾或爆炸事故。查看更多
密封气的处理? 因为量小,没有回收价值,更没有必要增加设备投资进行处理,只需将密封气接入火炬管线后,送入火炬进行焚烧即可。我们就是这么做的。查看更多
如何将C2文件的5.2版,存为5.1版的文件?谢谢!? 非常感谢楼上,我试试啊,等了很久了查看更多
简介
职业:江苏威名石化有限公司 - 工艺技术员
学校:长江大学 - 化工
地区:辽宁省
个人简介:人生贵知心,定交无暮早。查看更多
已连续签到天,累积获取个能量值
  • 第1天
  • 第2天
  • 第3天
  • 第4天
  • 第5天
  • 第6天
  • 第7天
 
这是一条消息提示
 
提醒
您好,您当前被封禁天,这天内您将不能登陆盖德问答,离解封时间还有
我已了解
提醒
提问需要5个能量值,您当前能量值为,请完成任务提升能量值
去查看任务