Proii 8.3 电解质问题？ 各位高手好。 我们目前运行一个别人用 Proii8.3 创建并收敛的一个模拟文件。但不管我用 9.0 高版本的还是 8.3 同样版本的，都会告我缺少电解质模块数据库。如下所示： “*** RUN STATISTICS STARTED 22:52:35 08/09/14 16 ERRORS FINISHED 22:52:37 08/09/14 16 WARNINGS RUN TIMES NO MESSAGES INTERACTIVE 0 MIN, 0.00 SEC CALCULATIONS 0 MIN, 1.89 SEC TOTAL 0 MIN, 1.89 SEC *** ERROR *** Electrolyte MODEL MISSING database or model data block NOT FOUND. Check the MISSING or the DBSFIL data base files. Verify that they exist in the current working directory. *** ERROR *** Electrolyte MODEL MISSING database or model data block NOT FOUND. Check the MISSING or the DBSFIL data base files. Verify that they exist in the current working directory.” 请问各位高手我应该怎么办解决此问题？？ 查看更多9个回答 . 1人已关注
关于焊后热处理的翻译？ 1. Root passes may be made in any direction, butfiller and capping passes shall not be made in the downhill direction below the 2 o'clock position . 根部焊道可从任意方向进行，但填充焊道和盖面焊道不得在低于 2 点位置 的向下方向焊接。 焊接上的东西，不是太懂，麻烦大家看一下，这个2点位置从焊接技巧上是怎么理解的？难道就如同钟表指针的位置吗？ 2. After completion of PWHT all thermocouple shall be removed and the attachment areas ground smooth to clean, sound metal and MP or LP as applicable . 焊后热处理完成后，应去除所有 热电偶 ，附件连接区域应打磨成干净、光洁的金属，以中压或低压作为准据。 如果MP或LP是指middle pressure or low pressure，那么这和之前的半句话有什么直接联系呢？ The ends of open lines shall be closed off in order to eliminate drafts or air circulation that could lower the temperature on the inside surface of the joint unless the internal surface is also insulated. 主要是划红线部分，麻烦大家帮忙看看啊。 查看更多5个回答 . 1人已关注
第1天
关注盖德视界
添加小助手
